4-Pin vs 5-Pin LED Strip: Which Connector Should You Choose?

Choosing the wrong connector could result in damage to your device or a non-functioning light bande. In this article, you’ll learn the core differences between 4-pin RGBW and 5-pin RGB+CCT connectors, see clear wiring diagrams, and get adapter usage advice.

Here’s how these connectors differ:

• 4-Pin RGBW – R, G, B color channels plus a dedicated white channel on a +12 V rail.

• 5-Pin RGB+CCT – R, G, B channels plus cool white and warm white channels on +12 V.

• Compatibility Note – You must use a proper adapter to run a 5-pin strip from a 4-pin header; direct wiring can damage both strip and controller.

What Is the Difference Between 4-Pin and 5-Pin LED Strips?

The table below compares pin assignments and functions for 4-pin RGBW and 5-pin RGB+CCT LED strips:

Data source: IEC Connector Pinout Standard PDF

How to Wire a 5-Pin RGB+CCT Strip to a 4-Pin Connector Safely

When adapting a 5-pin RGB+CCT strip to a 4-pin RGBW header, you must merge the two white channels and leave the spare pin isolated. Always power off and verify pin assignments before connecting.

4-Pin RGBW Wiring Diagram (M1)

5-Pin RGB+CCT Wiring Diagram (M2)

Can I plug a 5-pin strip into a 4-pin header?
No—directly connecting all five wires to a 4-pin header can overload the controller and damage the strip. Use a proper adapter or merge the two white channels into the single white pin on your controller, leaving the extra conductor unconnected.

When to Choose 4-Pin vs 5-Pin LED Strips

• 4-Pin RGBW:
  Choose when you need both full-color mixing (RGB) and a single white channel for simple tunable-white accents—ideal for mood lighting, under-cabinet illumination, or accent strips.

• 5-Pin RGB+CCT:
  Opt for RGB+CCT strips when precise control over color temperature is required—separate cool-white and warm-white channels let you dial in exact kelvin values alongside RGB effects, perfect for task lighting or circadian-friendly installations.

Key takeaway: Use RGBW for straightforward color + white mixes and RGB+CCT when you need dedicated control of two white channels for fine-tuned ambiance.

Questions fréquemment posées

Why do some LED strips have five wires?
Five-wire strips include separate cool-white and warm-white channels in addition to the RGB channels. This lets you control color temperature precisely—mixing both whites for any desired hue—whereas 4-pin strips only offer a single white output.

How can I adapt a 4-pin header for a 5-pin RGB+CCT strip?
Use a wiring adapter or harness that merges the two white leads into one on the controller’s white pin, and tape off or insulate the extra conductor. Ensure the adapter matches the +12 V and RGB channels exactly to prevent shorts.

Can I plug a 5-pin strip into a 4-pin controller?
No—direct connection risks overloading the controller or strip. Always use an adapter or merge the white channels properly; leave any unused wire insulated and unconnected.

What happens if you mis-wire a 5-pin CCT LED strip?
Mis-wiring can apply incorrect voltage to the white channels or data pins, causing flicker, erratic behavior, or permanent damage to the LEDs and controller. Always double-check pin assignments before powering up.

Conclusion & Next Steps

Choosing the right connector—4-pin RGBW or 5-pin RGB+CCT—ensures both safe operation and the lighting effects you need. Refer to the wiring diagrams above when setting up your strip, and use a proper adapter to match any header mismatch.

For detailed guidance, see our LED Strip Wiring Guide and explore compatible controllers in the Contrôleur de LED Selection Guide.