LED package comparison helps you choose between 2835 and 3528 LED strips because the package affects brightness, heat, power use, and cost. A 2835 LED strip usually gives stronger light for task areas, while a 3528 LED strip usually fits softer ambient or decorative lighting.
Therefore, choose 2835 when the project needs bright light for kitchens, offices, retail shelves, or work areas. However, choose 3528 when the project needs lower cost, lower power use, and gentler accent light.
For related internal resources, review Elstar’s مصابيح شريطية LED, شرائط COB LED, LED power suppliesو مقاطع الألومنيوم LED. For an outside reference on LED package names, see HitLights’ guide to 2835, 3528, and 5050 LEDs.
This LED package comparison starts with the size code. A 2835 LED measures about 2.8 mm by 3.5 mm, while a 3528 LED measures about 3.5 mm by 2.8 mm. Although the numbers look similar, the light output and common use cases are different.
A 2835 LED strip uses compact, high-output LEDs. In many projects, 2835 strips provide stronger light than 3528 strips. Also, they can work well for task lighting when paired with the right power supply and heat path.
A 3528 LED strip usually provides moderate light output. As a result, it is often used for soft room glow, decorative accents, shelf lighting, and places where strong brightness is not needed.
In a 2835 and 3528 LED package comparison, 2835 is usually better for brightness and task lighting. Meanwhile, 3528 is usually better for lower-cost ambient and decorative lighting.
The main technical differences are brightness, efficiency, power use, and heat handling. Also, the final result depends on LED density, strip quality, driver size, profile depth, and mounting method.
| Feature | شرائط LED 2835 | 3528 شرائط LED 3528 |
|---|---|---|
| السطوع | Higher output | Moderate output |
| Typical use | Task, retail, office, and display lighting | Ambient, decorative, and accent lighting |
| Power use | Higher output may need more planning | Lower output often uses less total power |
| Heat | Needs more care in high-output runs | Usually easier in soft-light setups |
| التكلفة | Often higher upfront | Often lower upfront |
2835 LED strips are useful when the project needs higher brightness. However, they may need better power and heat planning than softer strip types.
Choose 2835 LED strips when the project needs strong light and better visibility. Also, use them when the strip supports task lighting or retail display lighting.
3528 LED strips are useful when the project needs softer light and lower cost. Therefore, they are common in ambient, accent, and decorative setups.
Choose 3528 LED strips for bedrooms, living rooms, shelf accents, and soft decorative light. However, avoid them when the project needs strong task lighting.
Use the lighting goal first. Then, choose the package that fits the task, room, and budget.
For a kitchen counter, 2835 is often the better choice because brightness matters. Meanwhile, for a bedroom cove, 3528 may be enough because the goal is a soft glow.
To choose well, compare brightness needs, room use, budget, heat, and power supply size. Also, think about whether the strip is for mood, accent, or task lighting.
Yes, if the project needs strong brightness, better efficiency, or clear task light. However, for soft ambient lighting, 3528 may be a more cost-friendly choice.
Good installation helps both strip types work better. Therefore, plan layout, mounting, power, and heat before final installation.
Yes. 2835 LEDs usually offer much higher brightness than 3528 LEDs. Therefore, they are better for task lighting and areas that need stronger light.
In many cases, 2835 strips give more light per watt. However, 3528 strips may use less total energy because they are usually lower brightness.
Usually, no. 3528 strips are better for ambient or decorative light. For task lighting, 2835 strips are often the better choice.
For soft mood light, 3528 can work well. However, if you need brighter kitchen, office, or retail light, 2835 is the better choice.
The right choice depends on brightness, budget, heat, and use case. First, decide whether the project needs task light or mood light. Next, choose the strip that matches that goal.
Choose 2835 for brighter, more efficient task lighting. In contrast, choose 3528 for softer, lower-cost ambient or decorative lighting. Then, check power supply, heat, and mounting before final installation.
Ready to select the right LED lighting solution? Browse Elstar’s مصابيح شريطية LED, LED power supplies, or contact Elstar for project support.
English 
Spanish 
French 
Arabic 
