{"id":66347,"date":"2026-01-21T16:41:17","date_gmt":"2026-01-21T08:41:17","guid":{"rendered":"https:\/\/www.elstarled.com\/?p=66347"},"modified":"2026-05-12T13:01:45","modified_gmt":"2026-05-12T05:01:45","slug":"cob-led-strip-waterproof","status":"publish","type":"post","link":"https:\/\/www.elstarled.com\/es\/cob-led-strip-waterproof\/","title":{"rendered":"Waterproof COB LED Strip Lights: IP65 vs IP67 vs IP68, Installation, and an RFQ Checklist"},"content":{"rendered":"<p><strong>Table of contents<\/strong><\/p>\n<nav id=\"top\" class=\"toc\">\n<ul>\n<li><a href=\"#fast-answer-waterproof-cob-led-strips-ip-ratings-system-reality\">Waterproof COB LED Strips: IP Ratings and System Reality<\/a><\/li>\n<li><a href=\"#what-waterproof-means-for-cob-led-strips-and-what-it-doesnt\">What \u201cWaterproof\u201d Means for COB LED Strips<\/a><\/li>\n<li><a href=\"#ip65-vs-ip67-vs-ip68-choose-by-exposure-not-by-guessing\">IP65 vs IP67 vs IP68: Choose by Exposure<\/a><\/li>\n<li><a href=\"#project-specification-checklist-before-you-order-samples\">Project Checklist Before You Order Samples<\/a><\/li>\n<li><a href=\"#outdoorwet-installation-system-level-waterproofing-steps\">Outdoor and Wet-Area Install Steps<\/a><\/li>\n<li><a href=\"#cutting-reconnecting-and-custom-lengths-how-to-preserve-waterproofing\">Cutting, Joining, and Custom Lengths<\/a><\/li>\n<li><a href=\"#why-waterproof-cob-strips-fail-outdoors-and-how-to-prevent-it\">Why Waterproof COB Strips Fail Outdoors<\/a><\/li>\n<li><a href=\"#waterproofing-methods-compared-coated-vs-sleeveencapsulated\">Waterproofing Methods Compared<\/a><\/li>\n<li><a href=\"#rfq-documentation-checklist-what-to-confirm-with-suppliers\">RFQ and Supplier Checklist<\/a><\/li>\n<li><a href=\"#faq\">PREGUNTAS FRECUENTES<\/a><\/li>\n<li><a href=\"#summary-next-steps-project-safe-recommendations\">Summary and Next Steps<\/a><\/li>\n<\/ul>\n<\/nav>\n<p>If you search for a \u201cwaterproof COB LED strip,\u201d you likely need to solve two things at once. First, you need the right IP rating for the site. Also, you need a plan that stops water from entering through ends, cuts, plugs, cables, drivers, or controls.<\/p>\n<p>Therefore, this guide treats \u201cwaterproof\u201d as a full system need. It is not only a label on the strip.<\/p>\n<h2 id=\"fast-answer-waterproof-cob-led-strips-ip-ratings-system-reality\"><strong>Waterproof COB LED Strips: IP Ratings and System Reality<\/strong><\/h2>\n<p>Yes, COB LED strips can be waterproof. However, the strip must use a wet-rated build, and the whole setup must stay sealed as one system. That system includes the strip body, ends, cuts, plugs, cable entries, drivers, and controls.<\/p>\n<p>IP65, IP67, and IP68 are common labels. Still, your choice should start with the real site: splashes, rain, pooled water, or use in water. After that, ask how the supplier seals each weak point.<\/p>\n<h3>Fast Buyer Takeaway<\/h3>\n<p>In short, do not buy by the word \u201cwaterproof\u201d alone. Instead, match the strip to the site, then check the seal plan. As a result, you can reduce leaks before you order a full batch.<\/p>\n<p><strong>Key Points<\/strong><\/p>\n<ul>\n<li>COB describes the light style. It does not make a strip waterproof by itself.<\/li>\n<li>Waterproof claims help only when they name a clear rating and scope.<\/li>\n<li>Most wet-area faults start at ends, cuts, plugs, cable entries, drivers, or controls.<\/li>\n<li>IP68 does not mean \u201cunderwater forever.\u201d The supplier must state depth and time limits.<\/li>\n<li>Start with the site. Then, check the model\u2019s IP claim and seal rules.<\/li>\n<\/ul>\n<h3>Quick IP Starting Point<\/h3>\n<p>Use the table below as a first check. However, always confirm the final choice with the model data sheet.<\/p>\n<table>\n<thead>\n<tr>\n<th>Wet area<\/th>\n<th>Common IP label<\/th>\n<th>What it often means<\/th>\n<th>Main risk to plan for<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>Indoor splashes or light wiping<\/td>\n<td>IP65<\/td>\n<td>Basic splash or spray cover, based on the model<\/td>\n<td>Ends, cuts, and plugs still need sealing<\/td>\n<\/tr>\n<tr>\n<td>Outdoor rain or wind-driven wetting<\/td>\n<td>IP67<\/td>\n<td>Stronger wet-area cover; some models may allow short water contact<\/td>\n<td>Water often enters through ends and cable entries<\/td>\n<\/tr>\n<tr>\n<td>Pooled water or possible use in water<\/td>\n<td>IP68<\/td>\n<td>Water-use cover under stated limits<\/td>\n<td>Depth and time limits must come from the supplier<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<p><img decoding=\"async\" loading=\"lazy\" class=\"aligncenter size-large wp-image-66350\" src=\"https:\/\/www.elstarled.com\/wp-content\/uploads\/2026\/01\/ip-scenario-map_splash-rain-pooling-immersion-1024x683.webp\" alt=\"Simple infographic showing splash, rain, pooling, and immersion mapped to IP65, IP67, and IP68 with a note to verify supplier conditions\" width=\"1024\" height=\"683\" srcset=\"https:\/\/www.elstarled.com\/wp-content\/uploads\/2026\/01\/ip-scenario-map_splash-rain-pooling-immersion-1024x683.webp 1024w, https:\/\/www.elstarled.com\/wp-content\/uploads\/2026\/01\/ip-scenario-map_splash-rain-pooling-immersion-300x200.webp 300w, https:\/\/www.elstarled.com\/wp-content\/uploads\/2026\/01\/ip-scenario-map_splash-rain-pooling-immersion-18x12.webp 18w, https:\/\/www.elstarled.com\/wp-content\/uploads\/2026\/01\/ip-scenario-map_splash-rain-pooling-immersion-219x146.webp 219w, https:\/\/www.elstarled.com\/wp-content\/uploads\/2026\/01\/ip-scenario-map_splash-rain-pooling-immersion-50x33.webp 50w, https:\/\/www.elstarled.com\/wp-content\/uploads\/2026\/01\/ip-scenario-map_splash-rain-pooling-immersion-113x75.webp 113w, https:\/\/www.elstarled.com\/wp-content\/uploads\/2026\/01\/ip-scenario-map_splash-rain-pooling-immersion.webp 1536w\" sizes=\"(max-width: 1024px) 100vw, 1024px\" \/><\/p>\n<h3>Boundary Notes<\/h3>\n<ul>\n<li>IP ratings use set test scopes. However, product pages may shorten the meaning, so check the exact strip model. See IEC overview: <a href=\"https:\/\/www.iec.ch\/ip-ratings\" rel=\"noopener noreferrer\">IEC \u2013 Ingress Protection (IP) ratings<\/a>.<\/li>\n<li>For IPX8 or IP68, depth and time are not the same for every item. Therefore, ask for the stated limits. See <a href=\"https:\/\/keystonecompliance.com\/ipx7-ipx8-water-immersion\/\" rel=\"noopener noreferrer\">Applus+ Keystone \u2013 IPX7 &amp; IPX8 water tests<\/a> y <a href=\"https:\/\/www.polycase.com\/techtalk\/nema-rated-enclosures\/ip67-vs-ip68.html\" rel=\"noopener noreferrer\">Polycase \u2013 IP67 vs IP68<\/a>.<\/li>\n<li>A waterproof strip can still fail if the ends, plugs, driver, or controls sit in wet spots.<\/li>\n<\/ul>\n<h2 id=\"what-waterproof-means-for-cob-led-strips-and-what-it-doesnt\"><strong>What \u201cWaterproof\u201d Means for COB LED Strips<\/strong><\/h2>\n<p>For COB LED strips, \u201cwaterproof\u201d should mean two things. First, the strip has a clear water rating. Second, the full setup keeps water out of each entry point.<\/p>\n<p>For example, the top of the strip may look sealed. However, water can still enter through a cut end, a cable joint, or a loose plug. Therefore, the full layout matters as much as the strip body.<\/p>\n<h3>COB vs Waterproof<\/h3>\n<p>COB means \u201cchip on board.\u201d In LED strips, this style helps make a smooth and dot-free light line. However, COB does not define water safety.<\/p>\n<p>A COB strip can be non-waterproof, splash-safe, weather-safe, or built for stronger wet use. Because of this, buyers should check the wet-rated model, not only the COB label.<\/p>\n<p><strong>Key Points<\/strong><\/p>\n<ul>\n<li>COB is a light style. Waterproofing is a build and seal method.<\/li>\n<li>The same product family may include dry and wet versions.<\/li>\n<li>Your seal plan often matters more than the strip name.<\/li>\n<\/ul>\n<h3>Waterproof vs Water-Resistant<\/h3>\n<p>People often use these words in loose ways. Still, they do not always mean the same thing.<\/p>\n<p>Water-resistant often means the strip can handle limited splashes or spray. By contrast, waterproof is often used for stronger wet use. If the strip may sit in water, ask for the exact test depth and time.<\/p>\n<p><strong>Key Points<\/strong><\/p>\n<ul>\n<li>IP codes show dust and water cover.<\/li>\n<li>IP65, IP67, and IP68 are useful labels, but they are not enough by themselves.<\/li>\n<li>For IP68, the supplier must state the water-use limits for the exact model.<\/li>\n<\/ul>\n<h3>The Full Waterproof System<\/h3>\n<p>A reliable wet-area setup protects more than the strip surface. It also protects strip ends, cut points, plugs, cable entries, drivers, controls, and boxes.<\/p>\n<p>As a result, many field faults come from the parts around the strip, not from the light line itself.<\/p>\n<p><strong>Check these parts:<\/strong><\/p>\n<ul>\n<li>strip ends and cut ends,<\/li>\n<li>plugs and cable joints,<\/li>\n<li>cable entries into boxes,<\/li>\n<li>driver and control placement,<\/li>\n<li>mounting route and drip path.<\/li>\n<\/ul>\n<h2 id=\"ip65-vs-ip67-vs-ip68-choose-by-exposure-not-by-guessing\"><strong>IP65 vs IP67 vs IP68: Choose by Exposure<\/strong><\/h2>\n<p>Choose IP65, IP67, or IP68 based on real wet risk. Do not choose by guesswork. Also, avoid using \u201coutdoor\u201d as the only spec, because outdoor use can mean many things.<\/p>\n<p>For instance, a strip under a roof edge faces a different risk than a strip near a pool, fountain, or open sign box. Therefore, map the site before you compare models.<\/p>\n<h3>IP Ratings in Plain Words<\/h3>\n<p>IP codes show how well a product keeps out dust and water. The first digit relates to dust or solids. The second digit relates to water.<\/p>\n<p>In LED strip buying, suppliers often use IP65 for splash areas, IP67 for stronger wet areas, and IP68 for water-use projects. However, IP68 needs extra proof because the depth and time limits depend on the exact model.<\/p>\n<h3>IP65, IP67, and IP68 Comparison<\/h3>\n<p>Use this table as a guide. Then, ask the supplier for the model scope before you order.<\/p>\n<table>\n<thead>\n<tr>\n<th>IP label<\/th>\n<th>Best starting use<\/th>\n<th>What to confirm<\/th>\n<th>Install tip<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>IP65<\/td>\n<td>Indoor splashes, damp areas, and light spray<\/td>\n<td>Water scope and seal method<\/td>\n<td>Seal ends and keep power parts away from wet zones<\/td>\n<\/tr>\n<tr>\n<td>IP67<\/td>\n<td>Outdoor rain or stronger wet use<\/td>\n<td>Whether short water contact is allowed<\/td>\n<td>Protect cable entries and avoid pooled water<\/td>\n<\/tr>\n<tr>\n<td>IP68<\/td>\n<td>Pooled water or use in water<\/td>\n<td>Depth and time limits for this model<\/td>\n<td>Plan sealed entries, safe power parts, and service access<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<h3>Simple Selection Rules<\/h3>\n<p>If the strip only faces light splashes, IP65 may be enough. However, you still need sealed ends and safe power placement.<\/p>\n<p>If the strip faces direct rain, IP67 is often a better start. In addition, the layout should stop water from sitting near plugs or cut ends.<\/p>\n<p>If water can pool around the strip, do not rely on a basic waterproof claim. Instead, ask whether the model covers short water contact.<\/p>\n<p>Finally, if the strip will be used in water, ask for IP68 details. Most importantly, get the depth, time, and install limits in writing.<\/p>\n<h2 id=\"project-specification-checklist-before-you-order-samples\"><strong>Project Checklist Before You Order Samples<\/strong><\/h2>\n<p>Before you order samples, write a simple wet-area spec. This step helps the supplier choose the right model and reduces rework later.<\/p>\n<p>Start with the site. Then, list the ends, cuts, and plugs. After that, note where the driver and controls will sit.<\/p>\n<p><img decoding=\"async\" loading=\"lazy\" class=\"aligncenter size-large wp-image-66351\" src=\"https:\/\/www.elstarled.com\/wp-content\/uploads\/2026\/01\/rfq-inputs_to_model-verification-flow-1024x683.webp\" alt=\"Diagram showing RFQ inputs such as environment, terminations, mounting, and power placement feeding into model selection and document checks\" width=\"1024\" height=\"683\" srcset=\"https:\/\/www.elstarled.com\/wp-content\/uploads\/2026\/01\/rfq-inputs_to_model-verification-flow-1024x683.webp 1024w, https:\/\/www.elstarled.com\/wp-content\/uploads\/2026\/01\/rfq-inputs_to_model-verification-flow-300x200.webp 300w, https:\/\/www.elstarled.com\/wp-content\/uploads\/2026\/01\/rfq-inputs_to_model-verification-flow-18x12.webp 18w, https:\/\/www.elstarled.com\/wp-content\/uploads\/2026\/01\/rfq-inputs_to_model-verification-flow-219x146.webp 219w, https:\/\/www.elstarled.com\/wp-content\/uploads\/2026\/01\/rfq-inputs_to_model-verification-flow-50x33.webp 50w, https:\/\/www.elstarled.com\/wp-content\/uploads\/2026\/01\/rfq-inputs_to_model-verification-flow-113x75.webp 113w, https:\/\/www.elstarled.com\/wp-content\/uploads\/2026\/01\/rfq-inputs_to_model-verification-flow.webp 1536w\" sizes=\"(max-width: 1024px) 100vw, 1024px\" \/><\/p>\n<h3>Site and Wet-Risk Details<\/h3>\n<p>First, describe the site in plain terms. For example, say whether the strip will face indoor splashes, open rain, pooled water, or use in water.<\/p>\n<p>Also, note cleaning spray, heat swings, and possible moisture build-up. These details help the supplier avoid a poor match.<\/p>\n<ul>\n<li>indoor or outdoor use,<\/li>\n<li>splash, rain, pooling, or water-use risk,<\/li>\n<li>cleaning method,<\/li>\n<li>heat and cold changes,<\/li>\n<li>possible moisture build-up,<\/li>\n<li>use of a channel or profile.<\/li>\n<\/ul>\n<h3>Layout and Mounting Details<\/h3>\n<p>Next, describe the route. Include the run length, corners, cut points, plugs, and service access.<\/p>\n<p>In addition, say whether the strip will sit flat, inside a channel, under a cover, or in a tight space. This helps the supplier see where water may gather.<\/p>\n<ul>\n<li>total run length,<\/li>\n<li>number of corners,<\/li>\n<li>number of cuts and joins,<\/li>\n<li>mounting surface,<\/li>\n<li>channel or profile use,<\/li>\n<li>access for later checks.<\/li>\n<\/ul>\n<h3>Power and Control Details<\/h3>\n<p>Also, state where the driver and controls will sit. In many wet projects, these parts should stay in a dry or safer zone.<\/p>\n<p>If you use a box, describe how cables enter it. Cable entries often become weak points, so they need sealing and strain relief.<\/p>\n<h3>Sample Check Before Bulk Order<\/h3>\n<p>When samples arrive, do not check light output only. Instead, review the end caps, plugs, cable entries, seal method, channel fit, and data sheet.<\/p>\n<p>As a result, your team can spot install issues before the full order.<\/p>\n<p><strong>Sample checklist:<\/strong><\/p>\n<ul>\n<li>end cap quality,<\/li>\n<li>plug fit,<\/li>\n<li>cable entry design,<\/li>\n<li>seal method,<\/li>\n<li>channel or profile fit,<\/li>\n<li>install notes,<\/li>\n<li>model data sheet,<\/li>\n<li>IP rating notes.<\/li>\n<\/ul>\n<h2 id=\"outdoorwet-installation-system-level-waterproofing-steps\"><strong>Outdoor and Wet-Area Install Steps<\/strong><\/h2>\n<p>A waterproof COB LED strip works best when the whole setup blocks water paths. Therefore, plan the install before you cut, join, or close any channel.<\/p>\n<p><img decoding=\"async\" loading=\"lazy\" class=\"aligncenter size-large wp-image-66352\" src=\"https:\/\/www.elstarled.com\/wp-content\/uploads\/2026\/01\/outdoor-install_system-waterproofing-schematic-1024x683.webp\" alt=\"Outdoor installation schematic showing a strip in a channel, sealed end caps, cable routing away from drip paths, and protected driver placement\" width=\"1024\" height=\"683\" srcset=\"https:\/\/www.elstarled.com\/wp-content\/uploads\/2026\/01\/outdoor-install_system-waterproofing-schematic-1024x683.webp 1024w, https:\/\/www.elstarled.com\/wp-content\/uploads\/2026\/01\/outdoor-install_system-waterproofing-schematic-300x200.webp 300w, https:\/\/www.elstarled.com\/wp-content\/uploads\/2026\/01\/outdoor-install_system-waterproofing-schematic-18x12.webp 18w, https:\/\/www.elstarled.com\/wp-content\/uploads\/2026\/01\/outdoor-install_system-waterproofing-schematic-219x146.webp 219w, https:\/\/www.elstarled.com\/wp-content\/uploads\/2026\/01\/outdoor-install_system-waterproofing-schematic-50x33.webp 50w, https:\/\/www.elstarled.com\/wp-content\/uploads\/2026\/01\/outdoor-install_system-waterproofing-schematic-113x75.webp 113w, https:\/\/www.elstarled.com\/wp-content\/uploads\/2026\/01\/outdoor-install_system-waterproofing-schematic.webp 1536w\" sizes=\"(max-width: 1024px) 100vw, 1024px\" \/><\/p>\n<h3>Step 1: Map the Water Path<\/h3>\n<p>First, find where water may come from. Look for rain, spray, cleaning water, moisture build-up, and low spots where water may sit.<\/p>\n<p>Also, check whether water can run along a cable and drip into a plug or box.<\/p>\n<h3>Step 2: Count Ends, Cuts, and Plugs<\/h3>\n<p>Next, count every weak point. Each end, cut, and plug needs a seal plan.<\/p>\n<p>For harsh outdoor use, custom lengths can reduce field cuts. Therefore, they can also reduce leak risk.<\/p>\n<h3>Step 3: Seal and Support Weak Points<\/h3>\n<p>After layout planning, seal the ends and cable entries based on the supplier\u2019s method. Then, add strain relief where cables may move.<\/p>\n<p>This step matters because movement can open seals over time.<\/p>\n<h3>Step 4: Protect Drivers and Controls<\/h3>\n<p>Place drivers and controls in dry or safer areas when possible. If they must stay near wet zones, use a suitable box and seal the cable entries.<\/p>\n<p>In addition, keep enough access for later checks.<\/p>\n<h3>Step 5: Check Before Final Close-Up<\/h3>\n<p>Before you close profiles, covers, or wall spaces, check all seals. Look for gaps, loose caps, bare copper, or stressed cables.<\/p>\n<p>Finally, test the strip before the area becomes hard to reach.<\/p>\n<h3>When LED Neon May Fit Better<\/h3>\n<p>Sometimes, LED neon is a better choice than a waterproof COB strip. For example, it may help when the project needs a strong outer body and a very smooth light line.<\/p>\n<p>However, the choice still depends on site shape, wet risk, and service access.<\/p>\n<h2 id=\"cutting-reconnecting-and-custom-lengths-how-to-preserve-waterproofing\"><strong>Cutting, Joining, and Custom Lengths<\/strong><\/h2>\n<p>You can often cut waterproof COB LED strips. However, every cut creates a new weak point. Therefore, the cut end must be sealed again with the method approved for that model.<\/p>\n<p>Do not assume a field cut keeps the original IP rating. Instead, ask the supplier how to keep water out after cutting.<\/p>\n<p><img decoding=\"async\" loading=\"lazy\" class=\"aligncenter size-large wp-image-66353\" src=\"https:\/\/www.elstarled.com\/wp-content\/uploads\/2026\/01\/cut-end_reseal_points_strain-relief-1024x683.webp\" alt=\"Cut-end resealing illustration showing a cut point, end cap, sealing zone, cable entry, and strain relief area\" width=\"1024\" height=\"683\" srcset=\"https:\/\/www.elstarled.com\/wp-content\/uploads\/2026\/01\/cut-end_reseal_points_strain-relief-1024x683.webp 1024w, https:\/\/www.elstarled.com\/wp-content\/uploads\/2026\/01\/cut-end_reseal_points_strain-relief-300x200.webp 300w, https:\/\/www.elstarled.com\/wp-content\/uploads\/2026\/01\/cut-end_reseal_points_strain-relief-18x12.webp 18w, https:\/\/www.elstarled.com\/wp-content\/uploads\/2026\/01\/cut-end_reseal_points_strain-relief-219x146.webp 219w, https:\/\/www.elstarled.com\/wp-content\/uploads\/2026\/01\/cut-end_reseal_points_strain-relief-50x33.webp 50w, https:\/\/www.elstarled.com\/wp-content\/uploads\/2026\/01\/cut-end_reseal_points_strain-relief-113x75.webp 113w, https:\/\/www.elstarled.com\/wp-content\/uploads\/2026\/01\/cut-end_reseal_points_strain-relief.webp 1536w\" sizes=\"(max-width: 1024px) 100vw, 1024px\" \/><\/p>\n<h3>Can You Cut Waterproof COB LED Strips?<\/h3>\n<p>Yes, many waterproof COB strips can be cut at marked points. Still, the cut end must be sealed again.<\/p>\n<p>Before cutting, ask where the approved cut points are, what cap or seal method to use, and whether the supplier supports field sealing.<\/p>\n<h3>How to Reduce Field Seal Risk<\/h3>\n<p>For outdoor or hard-to-reach areas, custom lengths may be safer. They reduce the number of site cuts and joins.<\/p>\n<p>However, custom lengths do not remove all risk. The install team still needs to protect cable entries, drivers, and controls.<\/p>\n<h3>When Custom Lengths Make Sense<\/h3>\n<p>Choose custom lengths when the project has many wet-zone cuts, poor service access, rain exposure, pooled water risk, or a need for repeat work.<\/p>\n<p>As a result, the team makes fewer field seals and has fewer points to check later.<\/p>\n<ul>\n<li>many wet-zone cuts,<\/li>\n<li>low service access,<\/li>\n<li>rain or pooled water risk,<\/li>\n<li>fewer field joins needed,<\/li>\n<li>repeatable install work.<\/li>\n<\/ul>\n<h2 id=\"why-waterproof-cob-strips-fail-outdoors-and-how-to-prevent-it\"><strong>Why Waterproof COB Strips Fail Outdoors<\/strong><\/h2>\n<p>Most outdoor failures do not start in the middle of the strip. Instead, water enters through the easiest path.<\/p>\n<p>Common paths include ends, cuts, plugs, cable entries, and driver or control boxes. In addition, moisture and rust can build up over time.<\/p>\n<p><img decoding=\"async\" loading=\"lazy\" class=\"aligncenter size-large wp-image-66354\" src=\"https:\/\/www.elstarled.com\/wp-content\/uploads\/2026\/01\/ingress-points_system-map-1024x683.png\" alt=\"System map of water-ingress points including ends, cuts, connectors, cable entries, and driver or controller enclosures\" width=\"1024\" height=\"683\" srcset=\"https:\/\/www.elstarled.com\/wp-content\/uploads\/2026\/01\/ingress-points_system-map-1024x683.png 1024w, https:\/\/www.elstarled.com\/wp-content\/uploads\/2026\/01\/ingress-points_system-map-300x200.png 300w, https:\/\/www.elstarled.com\/wp-content\/uploads\/2026\/01\/ingress-points_system-map-18x12.png 18w, https:\/\/www.elstarled.com\/wp-content\/uploads\/2026\/01\/ingress-points_system-map-219x146.png 219w, https:\/\/www.elstarled.com\/wp-content\/uploads\/2026\/01\/ingress-points_system-map-50x33.png 50w, https:\/\/www.elstarled.com\/wp-content\/uploads\/2026\/01\/ingress-points_system-map-113x75.png 113w, https:\/\/www.elstarled.com\/wp-content\/uploads\/2026\/01\/ingress-points_system-map.png 1536w\" sizes=\"(max-width: 1024px) 100vw, 1024px\" \/><\/p>\n<h3>Common Failure Points<\/h3>\n<table>\n<thead>\n<tr>\n<th>Weak point<\/th>\n<th>What often goes wrong<\/th>\n<th>How to reduce risk<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>Strip end<\/td>\n<td>End cap is loose or poorly sealed<\/td>\n<td>Use the approved seal method and check it<\/td>\n<\/tr>\n<tr>\n<td>Cut end<\/td>\n<td>Field cut is not sealed well<\/td>\n<td>Limit cuts or order custom lengths<\/td>\n<\/tr>\n<tr>\n<td>Plug or joint<\/td>\n<td>Water reaches the plug<\/td>\n<td>Seal and support the plug<\/td>\n<\/tr>\n<tr>\n<td>Cable entry<\/td>\n<td>Water follows the cable into a box<\/td>\n<td>Use safe routing and sealed entries<\/td>\n<\/tr>\n<tr>\n<td>Driver or control<\/td>\n<td>Power parts sit in wet zones<\/td>\n<td>Move them to safer areas or use a suitable box<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<h3>Early Warning Signs<\/h3>\n<p>Watch for flicker, dim parts, dead sections, moisture near ends, rust near plugs, loose caps, or water inside channels.<\/p>\n<p>If these signs appear, inspect the setup soon. Otherwise, a small leak may spread to more parts.<\/p>\n<h3>Why Service Access Matters<\/h3>\n<p>A sealed setup still needs access for checks. If the strip is locked inside a space with no access, small faults can grow.<\/p>\n<p>For this reason, plan access points in wet, outdoor, or high-risk layouts.<\/p>\n<h2 id=\"waterproofing-methods-compared-coated-vs-sleeveencapsulated\"><strong>Waterproofing Methods Compared<\/strong><\/h2>\n<p>Waterproof COB strips use different cover methods. Each method has trade-offs. Therefore, choose based on wet risk, install work, and service needs.<\/p>\n<h3>Coated Waterproof Strips<\/h3>\n<p>Coated strips often fit splash or damp areas. They may also be easier to handle than thicker sealed styles.<\/p>\n<p>However, the coating does not remove the need to seal ends and cuts. Poor handling can also damage the surface.<\/p>\n<h3>Sleeve or Jacketed Strips<\/h3>\n<p>Sleeve or jacketed strips add an outer cover around the light strip. This can help in stronger wet areas.<\/p>\n<p>Still, end sealing becomes very important. If water enters the sleeve, it may travel along the strip.<\/p>\n<h3>Encased or Fully Sealed Strips<\/h3>\n<p>Encased strips often suit stronger wet use. Some may fit water-use projects, but only under stated limits.<\/p>\n<p>Therefore, buyers must still ask about depth, time, end sealing, and cable entry limits.<\/p>\n<h3>Method Comparison Table<\/h3>\n<table>\n<thead>\n<tr>\n<th>M\u00e9todo<\/th>\n<th>Best use<\/th>\n<th>Main caution<\/th>\n<th>Supplier question<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>Coated<\/td>\n<td>Splash and damp areas<\/td>\n<td>Ends and cuts still need sealing<\/td>\n<td>How are cut ends sealed?<\/td>\n<\/tr>\n<tr>\n<td>Sleeve or jacketed<\/td>\n<td>Outdoor rain and stronger wet areas<\/td>\n<td>Water can enter through poor end seals<\/td>\n<td>What is the approved end seal method?<\/td>\n<\/tr>\n<tr>\n<td>Encased<\/td>\n<td>Pooled water or water-use projects<\/td>\n<td>Depth and time limits must be clear<\/td>\n<td>What IP68 limits apply to this model?<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<h3>How Method Choice Affects Planning<\/h3>\n<p>More sealed builds can give better wet cover, but they can also make field cuts harder. As a result, the best method depends on how many cuts and joins the layout needs.<\/p>\n<p>If field cuts are likely, choose a model with a clear and repeatable end-seal method.<\/p>\n<h2 id=\"rfq-documentation-checklist-what-to-confirm-with-suppliers\"><strong>RFQ and Supplier Checklist<\/strong><\/h2>\n<p>A strong RFQ makes the word \u201cwaterproof\u201d clear. Do not write only \u201cneed waterproof COB strip.\u201d Instead, describe the site, wet risk, cuts, plugs, and power setup.<\/p>\n<p>Then, ask the supplier to confirm the model scope. This makes the quote easier to compare.<\/p>\n<h3>RFQ Fields to Include<\/h3>\n<table>\n<thead>\n<tr>\n<th>RFQ field<\/th>\n<th>What to write<\/th>\n<th>Why it matters<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>Wet risk<\/td>\n<td>splash, rain, pooling, or water use<\/td>\n<td>Helps choose the IP scope<\/td>\n<\/tr>\n<tr>\n<td>Target IP rating<\/td>\n<td>IP65, IP67, or IP68<\/td>\n<td>Sets the water-cover goal<\/td>\n<\/tr>\n<tr>\n<td>Ends and cuts<\/td>\n<td>number of ends, cuts, and plugs<\/td>\n<td>Shows leak risk and site work<\/td>\n<\/tr>\n<tr>\n<td>Cut plan<\/td>\n<td>factory length or field cut<\/td>\n<td>Affects seal method<\/td>\n<\/tr>\n<tr>\n<td>Mounting method<\/td>\n<td>tape, clips, channel, or profile<\/td>\n<td>Affects support and water paths<\/td>\n<\/tr>\n<tr>\n<td>Driver location<\/td>\n<td>dry zone, box, or wet-area limit<\/td>\n<td>Helps protect power parts<\/td>\n<\/tr>\n<tr>\n<td>Needed docs<\/td>\n<td>data sheet, IP notes, install notes<\/td>\n<td>Reduces guesswork<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<h3>Documents to Request<\/h3>\n<p>Ask for the model data sheet, IP rating notes, cut and seal guide, plug notes, install notes, and model or series scope.<\/p>\n<p>Also, if you need IP68, ask for the stated depth and time. This point is important because IP68 limits can vary by model.<\/p>\n<h3>Questions to Ask Suppliers<\/h3>\n<ol>\n<li>What IP rating applies to this exact model?<\/li>\n<li>Does the rating cover only the strip body or the full supplied set?<\/li>\n<li>How should cut ends be sealed?<\/li>\n<li>Can you supply custom lengths?<\/li>\n<li>What plug method do you suggest for wet areas?<\/li>\n<li>Where should the driver and controls sit?<\/li>\n<li>What are the IP68 depth and time limits, if any?<\/li>\n<li>What install limits should we know before sampling?<\/li>\n<\/ol>\n<div class=\"conversion\" data-nosnippet=\"\">\n<p>If you want a second set of eyes on a wet or outdoor COB strip spec, share your site risk, layout notes, and driver plan through the Elstar contact page: <a href=\"https:\/\/www.elstarled.com\/es\/pongase-en-contacto-con\/\" rel=\"noopener noreferrer\">Contact Elstar<\/a>.<\/p>\n<\/div>\n<h2 id=\"faq\"><strong>PREGUNTAS FRECUENTES<\/strong><\/h2>\n<p>These FAQs answer common questions about waterproof COB LED strips. Also, they use the same rule as the guide: match the product to the site, then seal the full setup.<\/p>\n<h3>What does \u201cwaterproof\u201d mean for COB LED strip lights?<\/h3>\n<p>It means the strip has a defined water rating, often shown as an IP rating. However, the full setup must also seal ends, cuts, plugs, cables, drivers, and controls.<\/p>\n<h3>What is the difference between IP65, IP67, and IP68?<\/h3>\n<p>IP65 often fits splash or spray areas. IP67 often fits stronger outdoor wet use. IP68 is for water-use projects, but the supplier must state the depth and time limits.<\/p>\n<h3>Is IP65 enough for outdoor COB LED strips?<\/h3>\n<p>Sometimes, yes. IP65 may work for covered outdoor areas with light splash risk. However, if the strip faces direct rain, pooled water, or flood risk, review IP67 or IP68 options.<\/p>\n<h3>What parts besides the strip need waterproofing?<\/h3>\n<p>Protect the ends, cut points, plugs, cable entries, driver, and controls. These parts often fail before the strip body does.<\/p>\n<h3>Can you cut waterproof COB LED strips?<\/h3>\n<p>Often, yes. However, the cut end must be sealed again. Also, the seal method must match the model\u2019s design.<\/p>\n<h3>What is the difference between coated and sleeve waterproof LED strips?<\/h3>\n<p>Coated strips often fit splash or damp areas. Sleeve or jacketed strips often fit stronger wet areas. Encased strips may fit water-use jobs, but only if the supplier gives clear IP68 limits.<\/p>\n<h3>Why do waterproof LED strips fail outdoors?<\/h3>\n<p>Water usually enters through weak points, not through the center of the strip. Common causes include loose end caps, poor cut sealing, exposed plugs, poor cable routing, and unsafe driver placement.<\/p>\n<h3>When should I choose LED neon instead of waterproof COB strips?<\/h3>\n<p>Choose LED neon when you need a stronger outer body and a smooth neon-style light line. However, the final choice still depends on shape, wet risk, and service access.<\/p>\n<h2 id=\"summary-next-steps-project-safe-recommendations\"><strong>Summary and Next Steps<\/strong><\/h2>\n<p>A waterproof COB LED strip project works best when you match the IP rating to the real wet risk and seal the full setup. The strip body matters, but the ends, cuts, plugs, cables, drivers, and controls matter just as much.<\/p>\n<h3>Quick Recap<\/h3>\n<ul>\n<li>Use IP65 for splash or light wet areas.<\/li>\n<li>Use IP67 for stronger outdoor wet use.<\/li>\n<li>Use IP68 only when the supplier states depth and time limits.<\/li>\n<li>Seal all ends, cuts, plugs, and cable entries.<\/li>\n<li>Keep drivers and controls protected.<\/li>\n<li>Order custom lengths when field cuts create too much risk.<\/li>\n<li>Ask for data sheets, IP notes, and install guides before bulk orders.<\/li>\n<\/ul>\n<h3>What to Send the Supplier<\/h3>\n<p>Finally, share your wet-risk type, layout, end and cut count, and driver placement plan. As a result, the supplier can suggest a better waterproof COB LED strip and a safer seal method.<\/p>\n<div class=\"conversion\" data-nosnippet=\"\">\n<p>For sourcing help, share: (1) wet-risk type, (2) layout with end and cut count, and (3) driver or control placement. You can start here: <a href=\"https:\/\/www.elstarled.com\/es\/pongase-en-contacto-con\/\" rel=\"noopener noreferrer\">Elstar contact<\/a> and mention \u201cwaterproof COB strip IP selection and seal plan.\u201d<\/p>\n<\/div>\n<p class=\"back-to-top\"><a href=\"#top\">Back to top<\/a><\/p>","protected":false},"excerpt":{"rendered":"<p>Table of contents Waterproof COB LED Strips: IP Ratings and System Reality What \u201cWaterproof\u201d Means for COB LED Strips IP65 vs IP67 vs IP68: Choose by<span class=\"excerpt-hellip\"> [...]<\/span><\/p>","protected":false},"author":4,"featured_media":66349,"comment_status":"open","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[514],"tags":[],"yoast_head":"<!-- This site is optimized with the Yoast SEO Premium plugin v20.5 (Yoast SEO v20.5) - https:\/\/yoast.com\/wordpress\/plugins\/seo\/ -->\n<title>Waterproof COB LED Strip Guide: IP65 vs IP67 vs IP68<\/title>\n<meta name=\"description\" content=\"Define \u201cwaterproof\u201d COB LED strips, compare IP65\/IP67\/IP68, plan system sealing for outdoor\/wet installs, and use a project RFQ checklist.\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/www.elstarled.com\/es\/cob-led-strip-waterproof\/\" \/>\n<meta property=\"og:locale\" content=\"es_ES\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"Waterproof COB LED Strip Lights: IP65 vs IP67 vs IP68, Installation, and an RFQ Checklist\" \/>\n<meta property=\"og:description\" content=\"Define \u201cwaterproof\u201d COB LED strips, compare IP65\/IP67\/IP68, plan system sealing for outdoor\/wet installs, and use a project RFQ checklist.\" \/>\n<meta property=\"og:url\" content=\"https:\/\/www.elstarled.com\/es\/cob-led-strip-waterproof\/\" \/>\n<meta property=\"og:site_name\" content=\"Elstar\" \/>\n<meta property=\"article:published_time\" content=\"2026-01-21T08:41:17+00:00\" \/>\n<meta property=\"article:modified_time\" content=\"2026-05-12T05:01:45+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/www.elstarled.com\/wp-content\/uploads\/2026\/01\/feature_waterproof-cob-led-strip_ip-selection_system-overview.webp\" \/>\n\t<meta property=\"og:image:width\" content=\"1536\" \/>\n\t<meta property=\"og:image:height\" content=\"1024\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/webp\" \/>\n<meta name=\"author\" content=\"David ZA\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Escrito por\" \/>\n\t<meta name=\"twitter:data1\" content=\"David ZA\" \/>\n\t<meta name=\"twitter:label2\" content=\"Tiempo de lectura\" \/>\n\t<meta name=\"twitter:data2\" content=\"16 minutos\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\/\/schema.org\",\"@graph\":[{\"@type\":\"WebPage\",\"@id\":\"https:\/\/www.elstarled.com\/cob-led-strip-waterproof\/\",\"url\":\"https:\/\/www.elstarled.com\/cob-led-strip-waterproof\/\",\"name\":\"Waterproof COB LED Strip Guide: IP65 vs IP67 vs IP68\",\"isPartOf\":{\"@id\":\"https:\/\/www.elstarled.com\/#website\"},\"datePublished\":\"2026-01-21T08:41:17+00:00\",\"dateModified\":\"2026-05-12T05:01:45+00:00\",\"author\":{\"@id\":\"https:\/\/www.elstarled.com\/#\/schema\/person\/8a556f06d39930d36730859fb68508bf\"},\"description\":\"Define \u201cwaterproof\u201d COB LED strips, compare IP65\/IP67\/IP68, plan system sealing for outdoor\/wet installs, and use a project RFQ checklist.\",\"breadcrumb\":{\"@id\":\"https:\/\/www.elstarled.com\/cob-led-strip-waterproof\/#breadcrumb\"},\"inLanguage\":\"es\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\/\/www.elstarled.com\/cob-led-strip-waterproof\/\"]}]},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\/\/www.elstarled.com\/cob-led-strip-waterproof\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\/\/www.elstarled.com\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Waterproof COB LED Strip Lights: IP65 vs IP67 vs IP68, Installation, and an RFQ Checklist\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\/\/www.elstarled.com\/#website\",\"url\":\"https:\/\/www.elstarled.com\/\",\"name\":\"Elstar\",\"description\":\"\",\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\/\/www.elstarled.com\/?s={search_term_string}\"},\"query-input\":\"required name=search_term_string\"}],\"inLanguage\":\"es\"},{\"@type\":\"Person\",\"@id\":\"https:\/\/www.elstarled.com\/#\/schema\/person\/8a556f06d39930d36730859fb68508bf\",\"name\":\"David ZA\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"es\",\"@id\":\"https:\/\/www.elstarled.com\/#\/schema\/person\/image\/\",\"url\":\"https:\/\/secure.gravatar.com\/avatar\/f343cc067358e1897df3095db9f82450?s=96&d=mm&r=g\",\"contentUrl\":\"https:\/\/secure.gravatar.com\/avatar\/f343cc067358e1897df3095db9f82450?s=96&d=mm&r=g\",\"caption\":\"David ZA\"},\"description\":\"David\u202fZA is a lighting\u2011technology specialist with 18\u202fyears\u2019 hands\u2011on experience designing and sourcing LED solutions for commercial and residential projects worldwide. He distills complex specs into plain English, helping contractors and brand owners choose the right strip\u2011light configuration\u2014faster and with total confidence.\",\"knowsAbout\":[\"LED Solution\"]}]}<\/script>\n<!-- \/ Yoast SEO Premium plugin. -->","yoast_head_json":{"title":"Waterproof COB LED Strip Guide: IP65 vs IP67 vs IP68","description":"Define \u201cwaterproof\u201d COB LED strips, compare IP65\/IP67\/IP68, plan system sealing for outdoor\/wet installs, and use a project RFQ checklist.","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/www.elstarled.com\/es\/cob-led-strip-waterproof\/","og_locale":"es_ES","og_type":"article","og_title":"Waterproof COB LED Strip Lights: IP65 vs IP67 vs IP68, Installation, and an RFQ Checklist","og_description":"Define \u201cwaterproof\u201d COB LED strips, compare IP65\/IP67\/IP68, plan system sealing for outdoor\/wet installs, and use a project RFQ checklist.","og_url":"https:\/\/www.elstarled.com\/es\/cob-led-strip-waterproof\/","og_site_name":"Elstar","article_published_time":"2026-01-21T08:41:17+00:00","article_modified_time":"2026-05-12T05:01:45+00:00","og_image":[{"width":1536,"height":1024,"url":"https:\/\/www.elstarled.com\/wp-content\/uploads\/2026\/01\/feature_waterproof-cob-led-strip_ip-selection_system-overview.webp","type":"image\/webp"}],"author":"David ZA","twitter_card":"summary_large_image","twitter_misc":{"Escrito por":"David ZA","Tiempo de lectura":"16 minutos"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"WebPage","@id":"https:\/\/www.elstarled.com\/cob-led-strip-waterproof\/","url":"https:\/\/www.elstarled.com\/cob-led-strip-waterproof\/","name":"Waterproof COB LED Strip Guide: IP65 vs IP67 vs IP68","isPartOf":{"@id":"https:\/\/www.elstarled.com\/#website"},"datePublished":"2026-01-21T08:41:17+00:00","dateModified":"2026-05-12T05:01:45+00:00","author":{"@id":"https:\/\/www.elstarled.com\/#\/schema\/person\/8a556f06d39930d36730859fb68508bf"},"description":"Define \u201cwaterproof\u201d COB LED strips, compare IP65\/IP67\/IP68, plan system sealing for outdoor\/wet installs, and use a project RFQ checklist.","breadcrumb":{"@id":"https:\/\/www.elstarled.com\/cob-led-strip-waterproof\/#breadcrumb"},"inLanguage":"es","potentialAction":[{"@type":"ReadAction","target":["https:\/\/www.elstarled.com\/cob-led-strip-waterproof\/"]}]},{"@type":"BreadcrumbList","@id":"https:\/\/www.elstarled.com\/cob-led-strip-waterproof\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/www.elstarled.com\/"},{"@type":"ListItem","position":2,"name":"Waterproof COB LED Strip Lights: IP65 vs IP67 vs IP68, Installation, and an RFQ Checklist"}]},{"@type":"WebSite","@id":"https:\/\/www.elstarled.com\/#website","url":"https:\/\/www.elstarled.com\/","name":"Elstar","description":"","potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/www.elstarled.com\/?s={search_term_string}"},"query-input":"required name=search_term_string"}],"inLanguage":"es"},{"@type":"Person","@id":"https:\/\/www.elstarled.com\/#\/schema\/person\/8a556f06d39930d36730859fb68508bf","name":"David ZA","image":{"@type":"ImageObject","inLanguage":"es","@id":"https:\/\/www.elstarled.com\/#\/schema\/person\/image\/","url":"https:\/\/secure.gravatar.com\/avatar\/f343cc067358e1897df3095db9f82450?s=96&d=mm&r=g","contentUrl":"https:\/\/secure.gravatar.com\/avatar\/f343cc067358e1897df3095db9f82450?s=96&d=mm&r=g","caption":"David ZA"},"description":"David\u202fZA is a lighting\u2011technology specialist with 18\u202fyears\u2019 hands\u2011on experience designing and sourcing LED solutions for commercial and residential projects worldwide. He distills complex specs into plain English, helping contractors and brand owners choose the right strip\u2011light configuration\u2014faster and with total confidence.","knowsAbout":["LED Solution"]}]}},"_links":{"self":[{"href":"https:\/\/www.elstarled.com\/es\/wp-json\/wp\/v2\/posts\/66347"}],"collection":[{"href":"https:\/\/www.elstarled.com\/es\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.elstarled.com\/es\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.elstarled.com\/es\/wp-json\/wp\/v2\/users\/4"}],"replies":[{"embeddable":true,"href":"https:\/\/www.elstarled.com\/es\/wp-json\/wp\/v2\/comments?post=66347"}],"version-history":[{"count":4,"href":"https:\/\/www.elstarled.com\/es\/wp-json\/wp\/v2\/posts\/66347\/revisions"}],"predecessor-version":[{"id":67568,"href":"https:\/\/www.elstarled.com\/es\/wp-json\/wp\/v2\/posts\/66347\/revisions\/67568"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.elstarled.com\/es\/wp-json\/wp\/v2\/media\/66349"}],"wp:attachment":[{"href":"https:\/\/www.elstarled.com\/es\/wp-json\/wp\/v2\/media?parent=66347"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.elstarled.com\/es\/wp-json\/wp\/v2\/categories?post=66347"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.elstarled.com\/es\/wp-json\/wp\/v2\/tags?post=66347"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}